Restraint Lanyards
Restraint Lanyard
The restraint lanyard is constructed from 30mm wide polyester webbing. The loops are protected by an abrasion resistant tubular webbing.
It has a minimum breaking strength of 22kN and conforms to EN 354:2010.
The lanyard is supplied without connectors and these need to be purchased separately.
Available for sale in 1.5m lengths only.
RGL12 Single Leg Adjustable Webbing Restraint Lanyard
The RGL12 is a single leg restraint lanyard is constructed from 26mm wide anti-bacterial polyester webbing that has a 37kN breaking strength which is in excess of many products on the market.
The adjustable option enables the user to adapt the lanyard to the correct length for the task at hand.
The lanyard conforms to EN 354:2010 for use as fall restraint only.
The lanyard is supplied without connectors and these need to be purchased separately.
Sales price excluding VAT & carriage | |
RGL12/1 Single Leg Adjustable Restraint Lanyard 1m | €25.78 |
RGL12/1.5 Single Leg Adjustable Restraint Lanyard 1.5m | €26.33 |
RGL12/2 Single Leg Adjustable Restraint Lanyard 2m | €26.89 |
Steel Screw-Gate Karabiner | €6.10 |
Service price excluding parts and VAT | |
Restraint Lanyard (all lengths) | €10.00 |
FA 40 901 20 Work Positioning Lanyard
The FA 40 901 20 work positioning lanyard is perfect where restraint is guaranteed. The lanyard simply adjusts using a buckle from 1 to 2 metres and includes a 17mm screw gate karabiner at one end and a snap hook at the other end.
Ideal for use in scissor lifts and cherry pickers, especially if you are hiring them in and do not know the exact length you require.
As with all height safety items, training is essential to ensure correct use.
Restraint Kernmantel Rope Lanyard
The restraint kernmantle rope lanyard is made up of 11mm diameter polyamide kernmantle rope. It has abrasion resistant thimbles to protect from damage by metallic contact. The stitching is protected by a transparent covering sleeve but leaves it visible for easy inspection.
The connectors are 1 steel snap hook (opening 17mm) and a steel scaffold hook (opening 55mm).
AL Range Work Positioning Lanyards
Work Positioning lanyards are specific in length to ensure that a fall can never take place. They are designed to stop the wearer from either being able to reach the edge, or to exit the basket if in a cherry picker.
The AL range is a stitched 10.5mm braided rope with encapsulated thimbles at either end. These are available in several lengths so the distance can be exactly what you require.
Weekly hire rate excluding VAT | |
Protecta 1 metre 10.5mm braided rope / thimbles | €3.13 |
Protecta 1.5 metre 10.5mm braided rope / thimbles | €3.75 |
Protecta 2 metre 10.5mm braided rope / thimbles | €4.38 |
Sales price excluding VAT & carriage | |
Protecta 1 metre 10.5mm braided rope / thimbles | €22.60 |
Protecta 1.5 metre 10.5mm braided rope / thimbles | €23.26 |
Protecta 2 metre 10.5mm braided rope / thimbles | €25.45 |
Service price excluding parts and VAT | |
All Work Positioning Lanyards up to 3 metres | €10.00 |
Protecta Work Positioning Trigger Lanyard
The Protecta Work Positioning Trigger Lanyard enables workers to use a structure or fixed ladder for partial support and stability whilst leaving both hands free to address tasks.
The trigger device offers simple adjustment for the 10.5mm kernmantle rope to give perfect work positioning even when the rope is dirty and wet.
They feature a triple action karabiner body connector and zinc plated steel snap hook anchorage connector. There are various rope lengths available to suit your needs.
The user must ensure that a suitable secondary means of fall protection is used (e.g. a fall arrest lanyard).
Sales price excluding VAT & carriage | |
Protecta Work Positioning Trigger Lanyard up to 2 metres in length | €158.45 |
Protecta Work Positioning Trigger Lanyard up to 3 metres in length | €176.50 |
Protecta Work Positioning Trigger Lanyard up to 4 metres in length | €178.91 |
Service price excluding parts and VAT | |
All Protecta Work Positioning Trigger Lanyards | €10.00 |
Work Positioning Kernmantle Rope Lanyard with Grip Adjuster
The work positioning kernmantle rope lanyard with grip adjuster and protective sleeve enables workers to use a structure for partial support and stability.
It is available as either a 2m or 4m unit with 12mm polyamide kernmantle rope which has an abrasion resistant thimble to protect the loops from damage. The stitching is protected by a transparent covering sleeve but leaves it visible for easy inspection.
The steel rope grab adjuster allows for a progressive movement to enable easy adjustment if the workers position changes during the work. The unit is supplied with a steel screw-locking karabiner (opening 18mm) and a steel snap hook (opening 17mm).
The units conform to EN358.
The user must ensure that if the device is being used as a third point of contact a suitable secondary means of fall protection must also be used.
Sales price excluding VAT & carriage | |
FA 40 903 20 Work Positioning Kernmantle Rope Lanyard with Grip Adjuster up to 2m length | €53.60 |
FA 40 903 40 Work Positioning Kernmantle Rope Lanyard with Grip Adjuster up to 4m length | €60.70 |
Service price excluding parts and VAT | |
Work Positioning Kernmantle Rope Lanyard with Grip Adjuster | €10.00 |
Work Positioning Kernmantle Rope Lanyard with Snap Hook
The work positioning kernmantle rope lanyard with grip adjuster and protective sleeve enables workers to use a structure for partial support and stability.
It is available as either a 5m or 10m unit with 12mm polyamide kernmantle rope which has an abrasion resistant thimble to protect the loops from damage. The stitching is protected by a transparent covering sleeve but leaves it visible for easy inspection.
The steel rope grab adjuster allows for a progressive movement to enable easy adjustment if the workers position changes during the work. The unit is supplied with a steel screw-locking karabiner (opening 18mm) and an aluminium snap hook (opening 25mm).
The units can also be used as an anchorage lanyard (EN 795:2012 Type B) by wrapping a structure, or as a horizontal temporary lifeline (EN 795:2012 Type C) by stretching it in a straight line between 2 (EN 795) anchorage points using the 2 included connectors.
The units conform to EN 358:2018, EN 795:2012 Type B, EN 795:2012 Type C.
The user must ensure that if the device is being used as a third point of contact a suitable secondary means of fall protection must also be used.
Sales price excluding VAT & carriage | |
FA 40 906 50 Work Positioning Kernmantle Rope Lanyard with Grip Adjuster up to 5m length | €157.40 |
FA 40 906 100 Work Positioning Kernmantle Rope Lanyard with Grip Adjuster up to 10m length | €167.90 |
Service price excluding parts and VAT | |
Work Positioning Kernmantle Rope Lanyard with Grip Adjuster | €10.00 |